Plastic hair brush buyers often compare unit prices without seeing the full cost structure. A plastic hair brush, injection molding process, and private label hair brush program all have different cost drivers. This guide explains resin cost, mold tooling, assembly labor, packaging, order quantity, and shipping in simple terms.
For overseas buyers and distributors, the lowest quotation is not always the lowest final cost. A brush with a low unit price may require expensive tooling, more manual assembly, or costly retail packaging. Hefeng helps buyers separate one-time costs from repeat order costs before they approve a project.
1. Quick answer: What is the typical plastic hair brush price?
A standard plastic hair brush may cost about 0.35 to 1.80 US dollars per piece at factory level. The actual price depends on brush size, resin type, bristle material, mold design, decoration, packaging, order quantity, and shipping terms.
Simple stock designs usually have the lowest price because the mold already exists. A custom shape with a new mold, soft-touch coating, special bristles, and retail packaging can cost 2.00 to 6.00 US dollars or more per piece. These figures are planning ranges, not fixed quotations.
| Plastic hair brush type | Typical factory price | Main price factors |
|---|---|---|
| Basic stock brush | 0.35 to 0.80 US dollars | Existing mold, standard PP or ABS, bulk packing |
| Custom shape brush | 0.80 to 1.80 US dollars | New tooling, custom color, logo, assembly |
| Detangling or massage brush | 0.90 to 2.50 US dollars | Flexible teeth, TPE parts, complex structure |
| Retail-ready private label brush | 1.50 to 6.00 US dollars | Printed box, inserts, decoration, inspection |
2. The five main parts of a plastic hair brush quotation
1. Resin and other raw materials
Resin is the plastic material used to make the handle, body, cushion, or teeth. Common options include polypropylene, ABS, PET, nylon, and TPE. Each material has a different price, strength, appearance, and processing requirement.
Polypropylene is light and economical. ABS provides a harder and more polished surface. Nylon is often used for strong brush pins or bristles. TPE gives a soft and flexible feel but usually increases material and processing costs.
| Material | Common use | Cost effect | Key benefit |
|---|---|---|---|
| PP | Brush body and handle | Low | Light weight and good chemical resistance |
| ABS | Premium handle and shell | Medium | Hard surface and good appearance |
| Nylon | Brush pins and bristles | Medium to high | Strength and heat resistance |
| TPE | Cushion, grip, flexible teeth | Medium to high | Soft touch and flexibility |
Material cost is not based only on the price per kilogram. The final calculation also includes product weight, runner waste, color masterbatch, rejected parts, and material drying or mixing. A 60 gram brush uses more resin than a 25 gram brush, even when both have the same design.
2. Mold and tooling cost
Injection molding tooling is a one-time cost used to produce the plastic parts. A simple one-piece mold may cost 1,500 to 5,000 US dollars. A multi-part mold with sliders, hot runners, or tight appearance requirements may cost 6,000 to 20,000 US dollars or more.
Tooling price depends on product size, cavity number, steel grade, mold structure, expected production life, and surface finish. A two-cavity mold can produce two parts in one cycle and may reduce unit cost. However, it usually requires a higher starting investment.
Buyer tip: Ask whether the tooling fee includes mold design, trial samples, modifications, maintenance, and ownership documents. These items should be written clearly in the quotation.
3. Assembly and finishing
A plastic hair brush may contain a body, cushion, bristles, pins, mirror, cover, magnet, label, and logo part. Assembly cost rises when workers must insert many parts or perform several inspection steps.
Automatic assembly can reduce labor for high-volume orders. Manual assembly may be more practical for small batches or products with changing designs. Other finishing costs may include polishing, spraying, rubber coating, laser engraving, pad printing, hot stamping, and ultrasonic welding.
| Production feature | Effect on unit cost | Reason |
|---|---|---|
| One-piece molded body | Lower | Fewer parts and less labor |
| Two or more plastic parts | Medium | More molds and assembly time |
| Metal or TPE components | Medium to high | Higher material and assembly cost |
| Logo printing or hot stamping | Higher | Extra setup, labor, and quality inspection |
4. Packaging cost
Packaging can represent 5 to 30 percent of the product cost. A bulk carton with a polybag is usually the lowest-cost option. A printed folding box, blister card, sleeve, insert, barcode label, and individual protective bag create a more expensive retail package.
Packaging also affects shipping volume. A compact brush may fit 48 to 96 pieces in one carton. A large retail box may reduce carton quantity to 12 to 36 pieces. This can increase freight cost even when the brush itself does not change.
| Packaging option | Estimated packaging cost per piece | Best for |
|---|---|---|
| Bulk carton and polybag | 0.03 to 0.12 US dollars | Distributors and online fulfillment |
| Printed paper card | 0.08 to 0.30 US dollars | Retail hanging display |
| Folding carton | 0.15 to 0.70 US dollars | Private label retail products |
| Blister or premium box | 0.30 to 1.50 US dollars | High-value and gift packaging |
5. Order quantity, testing, and logistics
Order quantity changes the cost in two ways. First, a larger order spreads tooling, setup, and inspection costs across more pieces. Second, a larger order may qualify for lower material and packaging prices.
For example, a 1,000-piece order may carry a tooling recovery cost of 2.00 US dollars per piece when the mold costs 2,000 US dollars. At 20,000 pieces, the same tooling adds only 0.10 US dollars per piece. The mold did not become cheaper; the cost was spread over more products.
Buyers should also budget for product testing, carton testing, inspection, export documents, inland transport, ocean or air freight, insurance, import duty, and local delivery. The factory unit price is only one part of the landed cost.
3. Step-by-step plastic hair brush cost calculation
Use the following flow chart when reviewing a factory quotation:
Product design and target quantity
Then material and product weight
Then mold and tooling plan
Then molding and finishing cost
Then assembly and inspection cost
Then packaging and carton volume
Then freight, duty, and other landed costs
Then final delivered cost
Step 1: Confirm the product specification
Record the length, width, weight, shape, color, bristle type, cushion design, logo method, and packaging style. A quotation based on a simple drawing may change after a complete 3D design is approved.
Step 2: Separate one-time and recurring costs
Tooling, prototype fees, and some artwork charges are usually one-time costs. Resin, molding, assembly, packaging, and freight are recurring costs. This separation helps buyers compare suppliers fairly.
Step 3: Calculate the estimated unit cost
A simple formula is: unit cost equals material cost plus molding cost plus assembly cost plus decoration cost plus packaging cost plus quality cost. Add the tooling recovery amount separately when planning the first order.
Step 4: Add the landed cost
Landed cost equals factory product cost plus packaging plus export handling plus freight plus insurance plus duty plus destination charges. A supplier with a slightly higher factory price may still offer a lower landed cost if the packaging is compact and the product has fewer defects.
4. Example price calculation for a custom hair brush
Consider a 35 gram ABS and TPE detangling brush with a printed folding carton. The following example shows how a buyer might build a planning budget for a 10,000-piece order.
| Cost item | Example cost per piece | Notes |
|---|---|---|
| ABS, TPE, and bristle material | 0.28 US dollars | Based on product weight and material grade |
| Injection molding | 0.22 US dollars | Multiple molded components |
| Assembly and inspection | 0.18 US dollars | Manual insertion and appearance check |
| Logo decoration | 0.08 US dollars | One-color printing |
| Folding carton and label | 0.35 US dollars | Retail-ready packaging |
| Factory product subtotal | 1.11 US dollars | Before tooling and freight |
| Tooling recovery | 0.30 US dollars | 3,000 US dollars divided by 10,000 pieces |
The estimated first-order product cost is 1.41 US dollars per piece before freight and import charges. Repeat orders may reduce the cost to about 1.11 US dollars if the design, material, packaging, and order quantity remain unchanged.
5. How to reduce plastic hair brush cost without reducing quality
Use an existing mold when possible
A stock mold can remove a tooling investment and shorten development time. Buyers can still create differentiation through color, logo, bristle design, packaging, and a custom combination of parts.
Reduce unnecessary product weight
Changing a 45 gram handle to a 35 gram handle can reduce resin use by about 22 percent. The design must still pass strength and durability checks. Thin walls should not create cracks, warping, or weak attachment points.
Choose packaging based on sales channel
Use bulk packaging for professional distributors that repackage products locally. Use printed cartons for retail shelves. Avoid large boxes that add freight cost when the sales channel does not need premium presentation.
Limit colors and decoration methods
One standard color and one logo method are easier to produce than six colors and several surface treatments. Multiple colors may require separate production planning, pigment control, and additional inspection.
Plan the annual volume
Share the expected annual demand with the manufacturer. A supplier can recommend cavity numbers, material purchasing, packaging quantities, and production scheduling. This may lower the total cost without changing the customer-facing design.
6. Questions buyers should ask a plastic hair brush manufacturer
Ask for a complete cost breakdown instead of only a unit price. The quotation should show the product specification, material, weight, mold fee, minimum order quantity, sample fee, decoration, packaging, carton size, gross weight, lead time, payment terms, and shipping basis.
- Is the quoted price based on an existing mold or new tooling?
- Who owns the mold after payment?
- What material grade and product weight are included?
- Does the price include bristles, cushion parts, and assembly?
- How many pieces fit into one export carton?
- What inspection standard applies to color, logo, bristles, and packaging?
- Is the quotation based on EXW, FOB, CIF, or another shipping term?
- How will the price change at 1,000, 5,000, and 20,000 pieces?
7. Why work with Hefeng on a custom hair brush project?
Hefeng works with overseas buyers, importers, distributors, and personal care brands on plastic hair brush development. A clear process helps control price before mass production begins.
Our quotation approach can connect product design, resin selection, injection molding, assembly, logo decoration, packaging, and inspection in one project plan. Buyers can review samples and confirm the specification before production.
The best supplier is not always the one with the lowest first number. The better choice is a manufacturer that explains the cost, controls product quality, protects the schedule, and provides a repeatable price for future orders.
8. Final pricing checklist
Before approving a plastic hair brush order, confirm these eight points:
- Product dimensions and target product weight.
- Resin, bristle, cushion, and metal component materials.
- Existing mold or new mold tooling requirement.
- Logo, color, coating, and decoration method.
- Assembly steps and inspection standard.
- Packaging style, carton quantity, and carton dimensions.
- Minimum order quantity and price breaks.
- Freight, duty, testing, and final landed cost.
In short, plastic hair brush pricing is controlled by more than resin. Tooling, labor, decoration, packaging, order volume, and logistics can change the final budget by several times. By reviewing every cost layer with a qualified Personal Care Brush Manufacturer such as Hefeng, overseas buyers can choose the right design and avoid unexpected charges.




